SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 260)

Command Line Interface
7-90
Example
show pppoe
This command shows information about the PPPoE
configuration.
Command Mode
Privileged Exec
Example
AP#(if-ethernet)#pppoe restart
AP#
AP#show pppoe
PPPoE Information
======================================================
State : Link up
Username : mike
Service Name : classA
IP Allocation Mode : Static
DNS Negotiation : Enabled
Local IP : 10.7.1.200
Echo Interval : 30
Echo Failure : 5
======================================================
AP#