SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 200)

Command Line Interface
7-30
sntp-server enable
This command enables SNTP client requests for time
synchronization with NTP or SNTP time servers specified by the
sntp-server ip command. Use the no form to disable SNTP
client requests.
Syntax
sntp-server enable
no sntp-server enable
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
The time acquired from time servers is used to record
accurate dates and times for log events. Without SNTP, the
wireless bridge only records the time starting from the factory
default set at the last bootup (i.e., 00:14:00,
January 1, 1970).
Example
Related Commands
sntp-server ip (page 7-29)
show sntp (page 7-33)
AP(config)#sntp-server enable
AP(config)#