SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 231)

WDS Commands
7-61
Example
WDS Commands
The commands described in this section are used to configure
the WIreless Distribution System (WDS) forwarding table.
AP#show authentication
Authentication Information
=========================================================
MAC Authentication Server : REMOTE
MAC Auth Session Timeout Value : 1 secs
802.1x : SUPPORTED
Broadcast Key Refresh Rate : 5 min
Session Key Refresh Rate : 5 min
802.1x Session Timeout Value : 300 secs
Address Filtering : DENIED
System Default : DENY addresses not found in filter table.
Filter Table
MAC Address Status
----------------- ----------
00-70-50-cc-99-1a DENIED
00-70-50-cc-99-1b ALLOWED
=========================================================
AP#
Command Function Mode Page
wds channel Selects the radio band to be used for
bridge links GC 7-62
wds mac-address Configures MAC addresses of
nodes in the wireless bridge network GC 7-62
wds enable Enables WDS forwarding for specific
wireless port IDs GC 7-63
show wds Displays the current entries in the
WDS forwarding table Exec 7-64