SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 175)

Entering Commands
7-5
The command “show interface ?” will display the following
information:
Partial Keyword Lookup
If you terminate a partial keyword with a question mark,
alternatives that match the initial letters are provided. (Remember
not to leave a space between the command and question mark.)
For example “s?” shows all the keywords starting with “s.”
Negating the Effect of Commands
For many configuration commands you can enter the prefix
keyword “no” to cancel the effect of a command or reset the
configuration to the default value. For example, the logging
command will log system messages to a host server. To disable
logging, specify the no logging command. This guide describes
the negation effect for all applicable commands.
Using Command History
The CLI maintains a history of commands that have been
entered. You can scroll back through the history of commands by
pressing the up arrow key. Any command displayed in the history
list can be executed again, or first modified and then executed.
Using the show history command displays a longer list of
recently executed commands.
AP#show interface ?
ethernet Show Ethernet interface
wireless Show wireless interface
<cr>
AP#show interface
AP#show s?
snmp sntp station system
AP#show s