SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 79)

Advanced Configuration
6-3
Advanced Configuration
The Advanced Configuration pages include the following options.
Menu Description Page
System Configures basic administrative and client
access 6-4
Identification Specifies the system name, location and
contact information 6-4
TCP / IP Settings Configures the IP address, subnet mask,
gateway, and domain name servers
6-7
Radius Configures the RADIUS server for wireless
client authentication 6-10
PPPoE Settings Configures PPPoE on the Ethernet interface
for a connection to an ISP 6-13
Authentication Configures 802.1X client authentication and
MAC address authentication 6-16
Filter Control Enables VLAN support and filters traffic
matching specific Ethernet protocol types 6-26
SNMP Controls access to this wireless bridge from
management stations using SNMP, as well
as the hosts that will receive trap messages 6-30
Administration Configures user name and password for
management access; upgrades software
from local file, FTP or TFTP server; resets
configuration settings to factory defaults;
and resets the wireless bridge 6-33
System Log Controls logging of error messages; sets the
system clock via SNTP server or manual
configuration 6-38
WDS Sets the MAC addresses of other units in the
wireless bridge network 6-43
Bridge Sets the time for aging out entries in the
bridge MAC address table 6-45
STP Configures Spanning Tree Protocol
parameters 6-47