System defaults, System defaults -10, Introduction 1-10 – SMC Networks ElliteConnect 2.4GHz/5GHz User Manual
Page 32
Advertising
Introduction
1-10
System Defaults
The following table lists some of the wireless bridge’s basic
system defaults. To reset the bridge defaults, use the CLI
command “reset configuration” from the Exec level prompt.
Feature
Parameter
Default
Identification
System Name
Dual Band Outdoor
AP
Administration
User Name
admin
Password
smcadmin
General
HTTP Server
Enabled
HTTP Server Port
80
TCP/IP
IP Address
DHCP
Subnet Mask
255.255.255.0
Default Gateway
0.0.0.0
Primary DNS IP
0.0.0.0
Secondary DNS IP
0.0.0.0
VLANs
Status
Disabled
Native VLAN ID
1
Filter Control
Ethernet Type
Disabled
Advertising