SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 218)

Command Line Interface
7-48
Example
radius-server timeout
This command sets the interval between transmitting
authentication requests to the RADIUS server.
Syntax
radius-server [secondary] timeout number_of_seconds
• secondary - Secondary server.
• number_of_seconds - Number of seconds the access point
waits for a reply before resending a request. (Range: 1-60)
Default Setting
5
Command Mode
Global Configuration
Example
show radius
This command displays the current settings for the RADIUS
server.
Default Setting
None
Command Mode
Exec
AP(config)#radius-server retransmit 5
AP(config)#
AP(config)#radius-server timeout 10
AP(config)#