SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 146)

System Configuration
6-70
command. To view the current security settings, use the show
interface
wireless a command.
Note: The index and length values used in the key command must be
the same values used in the encryption and transmit-key
commands.
AP(config)#interface wireless a 7-99
Enter Wireless configuration commands, one per line.
AP(if-wireless a)#encryption wep 128
7-110
AP(if-wireless a)#key wep 1 128 ascii abcdeabcdeabc 7-112
AP(if-wireless a)#transmit-key 1 7-113
AP(if-wireless a)#exit
AP#show interface wireless a
7-120
Wireless Interface Information
===========================================================
----------------Identification-----------------------------
Description : Enterprise 802.11a Wireless Outdoor
Bridge/AP
Service Type : WDS Bridge
SSID : DualBandOutdoor
Turbo Mode : OFF
Channel : 36
Status : Disable
----------------802.11 Parameters--------------------------
Transmit Power : FULL (15 dBm)
Max Station Data Rate : 54Mbps
Fragmentation Threshold : 2346 bytes
RTS Threshold : 2347 bytes
Beacon Interval : 100 TUs
DTIM Interval : 2 beacons
Maximum Association : 64 stations
----------------Security-----------------------------------
Encryption : 128-BIT WEP ENCRYPTION
WEP Key type : Alphanumeric
Default Transmit Key : 1
Static Keys :
Key 1: ***** Key 2: EMPTY Key 3: EMPTY Key 4: EMPTY
===========================================================
AP#