SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 138)

System Configuration
6-62
AP(config)#interface wireless a 7-99
Enter Wireless configuration commands, one per line.
AP(if-wireless a)#description RD-AP#3
7-99
AP(if-wireless a)#ssid r&d 7-100
AP(if-wireless a)#no turbo 7-103
AP(if-wireless a)#channel 44 7-102
AP(if-wireless a)#closed-system 7-101
AP(if-wireless a)#transmit-power full 7-107
AP(if-wireless a)#speed 9 7-101
AP(if-wireless a)#max-association 32 7-108
AP(if-wireless a)#beacon-interval 150 7-104
AP(if-wireless a)#dtim-period 5 7-104
AP(if-wireless a)#fragmentation-length 512 7-105
AP(if-wireless a)#rts-threshold 256 7-106
AP(if-wireless a)#exit
AP#show interface wireless a
7-120
Wireless Interface Information
===========================================================
----------------Identification-----------------------------
Description : RD-AP#3
Service Type : Access Point
SSID : r&d
Turbo Mode : OFF
Channel : 44
Status : Disable
----------------802.11 Parameters--------------------------
Transmit Power : FULL (15 dBm)
Max Station Data Rate : 9Mbps
Fragmentation Threshold : 512 bytes
RTS Threshold : 256 bytes
Beacon Interval : 150 TUs
DTIM Interval : 5 beacons
Maximum Association : 32 stations
----------------Security-----------------------------------
Closed System : ENABLED
Multicast cipher : WEP
Unicast cipher : WEP
WPA clients : SUPPORTED
WPA Key Mgmt Mode : DYNAMIC
WPA PSK Key Type : HEX
Encryption : DISABLED
Default Transmit Key : 1
Static Keys :
Key 1: EMPTY Key 2: EMPTY Key 3: EMPTY Key 4: EMPTY
Authentication Type : OPEN
===========================================================
AP#