SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 176)

Command Line Interface
7-6
Understanding Command Modes
The command set is divided into Exec and Configuration classes.
Exec commands generally display information on system status
or clear statistical counters. Configuration commands, on the
other hand, modify interface parameters or enable certain
functions. These classes are further divided into different modes.
Available commands depend on the selected mode. You can
always enter a question mark “?” at the prompt to display a list of
the commands available for the current mode. The command
classes and associated modes are displayed in the following
table:
Exec Commands
When you open a new console session on wireless bridge, the
system enters Exec command mode. Only a limited number of
the commands are available in this mode. You can access all
other commands only from the configuration mode. To access
Exec mode, open a new console session with the user name
“admin.” The command prompt displays as “AP#” for Exec mode.
Class Mode
Exec Privileged
Configuration Global
Interface-ethernet
Interface-wireless
Username: admin
Password: [system login password]
AP#