Scsi management, Channel information, Channel settings – Promise Technology VTrack M-Class M200i User Manual
Page 206: Channel information channel settings
VTrak M-Class Product Manual
198
SCSI Management
SCSI Management deals with all SCSI settings and functions. This feature
appears only with VTrak SCSI models.
Channel Information
1.
From the Main Menu, highlight SCSI Management and press Enter.
2.
Highlight one of the SCSI ports to select it and press Enter.
3.
Highlight Channel Info and press Enter.
This screen displays SCSI Channel Information:
•
Maximum Data Transfer Rate
•
Maximum LUNs per Target
•
Termination Status
•
List of currently assigned targets
•
Status of currently assigned targets
There are no user settings on this screen.
Channel Settings
1.
From the Main Menu, highlight SCSI Management and press Enter.
2.
Highlight one of the SCSI ports to select it and press Enter.
3.
Highlight Channel Settings and press Enter.
This screen displays a list of the 16 Targets and Termination for the selected
SCSI channel.
To enable a SCSI target:
1.
Highlight the target you want.
2.
Press the spacebar to toggle between Enabled and Disabled.
3.
Type Ctrl-A save your settings.
To set Termination for the VTrak SCSI controller “Out” connectors:
1.
Highlight Termination Control.
2.
Press the spacebar to toggle through Automatic, On and Off,
Note
You must reboot the VTrak for new settings to become effective.