Promise Technology VTrack M-Class M200i - Manual (Page 272)

VTrak M-Class Product Manual
264
Drive Status Indicators
There are two LEDs on each Drive Carrier. They report the presence of power
and a disk drive, and the current condition of the drive.
Figure 3. VTrak M500f/i/p Drive Carrier LEDs.
Figure 4. VTrak M300f/i/p and M200f/i/p disk carrier LEDs
The VTrak spins up the disk drives sequentially in order to equalize power draw
during start-up. After a few moments the Power/Activity and Disk Status LEDs
should display green.
See “Critical & Offline Disk Arrays” on page 286 for a discussion of rebuilding and
failed disk drives.
LEDs
State
Dark
Steady
Green
Flashing
Green
Amber Red
Power/
Activity
No Drive
Drive
Present
Activity n/a n/a
Status
No Power/
No Drive
Drive OK n/a
Drive
Rebuilding
Drive
Error
“n/a” means this state does not apply to this LED.
Disk Status
Power/
Activity
Disk Status
Power/Activity