Event viewer, Runtime events, Nvram events – Promise Technology VTrack M-Class M200i User Manual
Page 209: Runtime events nvram events
Chapter 5: Management with the CLU
201
Event Viewer
The Event Viewer displays log of events. Events are classified as Runtime and
NVRAM.
Runtime Events
This screen displays a list of and information about the 1023 most recent runtime
events recorded since the system was started.
To display Runtime Events:
1.
From the Main Menu, highlight Event Viewer and press Enter.
The log of Runtime Events appears. Events are added to the top of the list.
Each item includes:
•
Sequence number – Begins with 0 at system startup.
•
Device – Disk Array, Logical Drive, Physical Drive by its ID number.
•
Severity – (lowest to highest) Information, Warning, Minor, Major,
Critical and Fatal
•
Timestamp – Date and time the event happened.
•
Description – A description of the event in plain language.
2.
Press the up and down arrow keys to scroll through the log.
To clear the event log:
1.
Highlight Clear Runtime Event Log and press Enter.
2.
Press Y to confirm.
NVRAM Events
This screen displays a list of and information about 63 most recent important
events. NVRAM events are stored in non-volatile memory.
To display NVRAM events:
1.
From the Main Menu, highlight Event Viewer and press Enter.
2.
Highlight NVRAM Events and press Enter.
The log of NVRAM Events appears. Events are added to the top of the list.
Each item includes:
•
Sequence number – Begins with 0 at system startup.
•
Device – Disk Array, Logical Drive, Physical Drive by its ID number.
•
Severity – (lowest to highest) Information, Warning, Minor, Major,
Critical and Fatal
•
Timestamp – Date and time the event happened.
•
Description – A description of the event in plain language.