Promise Technology VTrack M-Class M200i - Manual (Page 280)

VTrak M-Class Product Manual
272
Battery is charging Battery is being recharged.
Battery reconditioning is
complete Battery reconditioning is finished.
Battery is malfunctioning Run battery reconditioning. See page 121. If this
message reappears, replace the battery.
Battery reconditioned
successfully Battery reconditioning is finished.
Battery reconditioning has
failed Replace the battery. See page 230or page 233.
Battery is reaching end of
life Replace the battery. See page 230or page 233.
Battery is removed The battery was disconnected or removed. Reinstall
the battery. See page 230or page 233.
Battery charging failed Replace the battery. See page 230or page 233.
Battery reconditioning
started Battery reconditioning has begun.
Battery recondition
terminated The battery was disconnected or removed during
reconditioning. Reinstall the battery. See page 230or
page 233.
Blowers
Blowers have started Normal.
Blowers have stopped Verify that the cooling unit is properly installed. If the
blower still does not turn, replace the blowers. See
page 221 or page 226.
Blower speed is
increased Check the VTrak for overheating. See page 289.
Blower speed is
decreased Temporary overheat condition was corrected.
Blowers are NOT
functioning Replace the blowers. See page 221 or page 226.
Blowers have been
inserted Normal.
Blowers have been
removed Reinstall the cooling unit(s). If the blowers does not
turn, replace the blowers. See page 221 or page 226.
Blowers are functioning
normally Normal.
Event Action