Promise Technology VTrack M-Class M200i - Manual (Page 283)

Chapter 8: Troubleshooting
275
Host-interface controller
has detected bus reset The initiator sent a reset command. If this message
appears repeatedly, contact Technical Support. See
page 299.
Host-interface controller
has encountered an
unrecoverable error Restart the VTrak. See page 218.
Host-interface controller
has received an abort-
task/ abort task set/clear
task set command. Result of user action. Normal.
Host-interface controller
has received an clear
ACA command. Result of clearing an auto contingent alliance
condition. If this message appears repeatedly,
contact Technical Support. See page 299.
Host-interface controller
has received a LUN reset
command. Result of user action. Normal.
Host-interface controller is
informed that the initiator
detected an error. A FC/iSCSI error occurred. If this message appears
repeatedly, contact Technical Support. See
page 299.
Host-interface controller
has received illegal
secondary identification A FC/iSCSI target received a second identify
message with a different LUN. If this message
appears repeatedly, contact Technical Support. See
page 299.
Host-interface controller
has received a message
parity error A FC/iSCSI message parity error. If this message
appears repeatedly, contact Technical Support. See
page 299.
Host-interface controller
has received a bus reboot The VTrak rebooted itself. If this message appears
repeatedly, contact Technical Support. See
page 299.
Host-interface controller
has encountered an
unknown error An unidentified error occurred. If this message
appears repeatedly, contact Technical Support. See
page 299.
Host-interface controller
has encountered a
system error A VTrak system error occurred. If this message
appears repeatedly, contact Technical Support. See
page 299.
Host-interface controller
has encountered a fatal
error Restart the VTrak. See page 218. If this message
appears repeatedly, contact Technical Support. See
page 299.
Event Action