Promise Technology VTrack M-Class M200i - Manual (Page 65)

57
Chapter 4: Management with WebPAM PROe
This chapter describes using embedded WebPAM PROe to monitor and manage
your RAID system. This chapter is divided into sections for major WebPAM PROe
components as shown above.
VTrak Status Indicators
Even though WebPAM PROe offers comprehensive monitoring of VTrak, the LED
indicators on the VTrak unit provide important status information.
When the power is switched on, the LEDs on the front of the VTrak will light up.
Figure 1. VTrak M500f/i/p front panel LED display
• VTrak Status Indicators (below)
• Drive Status Indicators (page 59)
• Audible Alarm (page 60)
• Log-in/Log-out (page 61)
• Graphic User Interface (page 64)
• Subsystems (page 68)
• Administrative Tools (page 75)
• Controllers (page 113)
• Enclosures (page 117)
• Physical Drives (page 122)
• Disk Arrays (page 128)
• Logical Drives (page 141)
• Spare Drives (page 150)
Power
FRU
Status
Logical Drive
Status
FC/iSCSI/
SCSI-1
Activity
FC/iSCSI/
SCSI-2
Activity
Controller
Heartbeat