Promise Technology VTrack M-Class M200i User Manual

Page 287

Advertising
background image

Chapter 8: Troubleshooting

279

Physical disk is marked
online

Disk drive removed from service due to errors. If
necessary, try to force the disk online. See page 127
or page 181.

Physical disk is marked
as dead.

Disk drive failure. Replace the disk drive. See
page 16.

Physical disk has been
reset

Disk drive reset after error and should function
normally.

Physical disk assigned as
global spare

Result of settings or user action. Normal.

Physical disk is no longer
assigned as global spare

Result of settings or user action. Normal.

Physical disk assigned as
dedicated spare

Result of settings or user action. Normal.

Physical disk is no longer
assigned as dedicated
spare

Result of settings or user action. Normal.

Physical disk has been
inserted

A disk drive has been inserted into the VTrak
subsystem.

Physical disk has been
removed

A disk drive has been removed from the VTrak
subsystem.

Bad sector is found on
physical disk

Disk drive has a bad sector. The drive should remap
around the bad sector. If this message appears
repeatedly, replace the disk drive.

Error is detected in remap
sectors

Disk drive has a bad remap sectors. If this message
appears repeatedly, replace the disk drive.

Command times out on
physical drive

Disk drive not responding to commands. If this
message appears repeatedly, replace the disk drive.

Physical disk negotiation
speed is decreased.

Disk drive had to reduce its data rate. If this message
appears repeatedly, replace the disk drive.

Previously configured disk
is no longer found

Disk drive may have failed or was removed from the
enclosure. Replace or reinstall the disk drive as
needed.

A physical disk has
encountered an unknown
(non-ECC) media error.

Disk drive experienced an unknown error. If this
message appears repeatedly, replace the disk drive.

Event

Action

Advertising
This manual is related to the following products: