Promise Technology VTrack M-Class M200i - Manual (Page 95)

Chapter 4: Management with WebPAM PROe
87
To access this tab:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click on the Fibre Channel Management icon.
4. Click the SFP tab in Management View
Fibre Channel Logged-in Devices
The Fibre Channel Management–Logged In Device tab enables you to view
information about the logged-in devices on the two Fibre Channel ports,
including:
• # – Device number
• WWPN – World Wide Port Name
• Port ID – ID of the device, not the Fibre Channel port
• Symbolic Name – If used
One of the devices in the list for each port will be the port itself. If there is no other
device, this notification will appear: There is no logged in device. If a Fibre
Channel switch is attached, it will also appear in this list.
To access this tab:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click on the Fibre Channel Management icon.
4. Click the Logged In Device tab in Management View
Fibre Channel Initiators
The Fibre Channel Management–Initiator tab enables you to view information
about the initiators on the two Fibre Channel ports, including:
• # – Device number
• WWPN – World Wide Port Name
• Port ID – ID of the initiator, not the Fibre Channel port
• Symbolic Name – If used
A Fibre Channel switch will also display as an initiator in the list. If your Host PC's
Fibre Channel HBA is connected to the VTrak directly (not though a Fibre
Channel switch), the initiator will NOT display in the initiator list.
To access this tab:
1. Click the Subsystem icon in Tree View.