Promise Technology VTrack M-Class M200i - Manual (Page 275)

Chapter 8: Troubleshooting
267
Figure 10.A VTrak iSCSI controller
Figure 11. A VTrak SCSI controller
Under normal conditions, the Controller Status LED (marked with icon) is
green and the Dirty Cache LED (marked with ) icon is dark.
If the Controller Status LED is amber, restart the VTrak. See “Restart the
Subsystem” on page 112 or “Shutdown and Restart” on page 213.
If the Controller Status LED continues to display amber after startup, contact
Promise Technical Support. See “Contact Technical Support” on page 299.
The Dirty Cache LED flashes during input/output operation. If the LED shines
amber and the power is off, there is unsaved data in the cache. Do NOT remove
the cooling unit (M300f/i/p, M200f/i/p) or the cooling unit with the battery
(M500f/i/p) while this LED is on. See “Unsaved Data in the Controller Cache” on
page 295 for more information.
LEDs
State
Dark Green Amber
Flashing
Amber
Status no power OK Error n/a
Dirty Cache OK n/a
Unsaved data
in cache
OK
“n/a” means this state does not apply to this LED.
Status LED Dirty Cache LED
Status LED Dirty Cache LED