Promise Technology VTrack M-Class M200i - Manual (Page 97)

Chapter 4: Management with WebPAM PROe
89
• Data sequence in order – Enables placement of data in sequence order.
• Uni-directional CHAP Authentication – Enables Challenge Handshake
Authentication Protocol.
• Bi-directional CHAP Authentication – Enables bi-directional and uni-
directional CHAP authentication.
To make changes to the Data Port settings:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click on the iSCSI Management icon.
4. Click the iSCSI Node 1 link in Management View.
5. Type an alias in the Alias field.
Maximum of 32 characters. Use letters, numbers, space between words,
and underscore. An alias is optional.
6. Enter the values in the fields as required
7. Check the boxes to enable features as required.
8. Click the Submit button.
iSCSI Ports
The iSCSI Management–Portal tab enables you to see the current Data Port
settings. To access to the iSCSI Management–Portal tab:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click on the iSCSI Management icon.
4. Click the Portal tab in Management View.
Information (in GUI order):
• Controller ID – (1).
• Port ID – (1 or 2).
• Max Receive Data Segment Length – (512 KB is the default).
• Number of Active Sessions – (Number of sessions logged into this port).
Notes
Header Digest and Data Digest work best with initiators equipped
with a TCP Offload Engine (TOE). Refer to your iSCSI HBA user
manual for more information.
For iSCSI network settings on the Data Ports, click on the Network
Management icon, then click on the iSCSI Network tab