Promise Technology VTrack M-Class M200i - Manual (Page 215)

Chapter 5: Management with the CLU
207
3. Highlight Privilege and press the space bar to toggle though the options:
• Super – Allows the user full access to all functions including create and
delete users and changing the settings of other users. The default
“administrator” account is a Super User
• Power – Allows the user to create and delete disk arrays and logical
drives, change RAID levels, change stripe size
• Maintenance – Allows the user to perform maintenance tasks including
Rebuilding, PDM, Media Patrol and Redundancy Check
• View – Allows the user to see all status and settings but not to make any
changes
4. Highlight Status and press the space bar to toggle between the options:
• Enabled – Allows the user to log in to the system
• Disabled – Prevents the user from logging in to the system
5. Press Ctrl-A to save the settings.
Delete User
1. Highlight the user you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing.
2. Highlight Delete Marked Users and press Enter.
3. Press Y to confirm the deletion.
Software Management
VTrak’s software services include:
• Email
• SLP (Service Location Protocol)
• Webserver
• Telnet
• SNMP (Simple Network Management Protocol)
• CIM (Common Information Model [a protocol])
• Netsend
To start any of these services:
1. Highlight the service and press Enter.
2. In the Service Setting screen, highlight Start and press Enter.
Note
You cannot delete a user while you are logged in as that user.