Promise Technology VTrack M-Class M200i - Manual (Page 314)

VTrak M-Class Product Manual
306
SNMP MIB Files
Promise supplies seven MIB files to integrate the VTrak M-Class subsystem into
your SNMP system. These files are in the SNMP folder on the VTrak Product CD.
The MIB files include:
• promise.mib
• system.mib
• interface.mib
• PromiseRAIDV4Storage.mib
• PromiseRAIDV4System.mib
• FCMGMT-MIB.mib
• IF-MIB.mib
Load MIB Files
To prevent error messages, you must load the Promise-supplied MIB files in this
order:
1. Load the promise.mib file.
2. Load the system.mib file.
3. Load the interface.mib file.
4. Load the remaining .mib files in any order.
For help with this procedure, see the instructions that came with your MIB
browser.
Compliance Statement
Promise VTrak M-Class Mx00f SNMP support is compliant to the IETF FC-
MGMT MIB (RFC 4044) by implementing the following MIB groups:
• ifGeneralInformationGroup
• ifVHCPacketGroup
• ifLinkUpDownNotificationGroup
• fcmInstanceBasicGroup
• fcmPortBasicGroup
• fcmPortStatsGroup
• fcmPortClass23StatsGroup
• fcmPortErrorStatsGroup