Promise Technology VTrack M-Class M200i - Manual (Page 62)

VTrak M-Class Product Manual
54
The proposed disk array appears with the logical drive(s) you specified.
14. If you agree with the proposed disk array and logical drive(s), click the
Submit button.
If you disagree, click the Back button and make changes as needed.
Additional Logical Drives
If you want to create additional logical drives and there is unused space on the
current disk array, click on the Disk Array icon and click on the Create LD tab.
You will go to Disk Array Advanced Creation (see page 48).
If the current disk array is fully allocated, use additional physical drives to create
a new disk array. Click on the Disk Arrays icon, then select Automatic,
Express or Advanced from the Create tab dropdown menu (see page 45).
Log-out of WebPAM PROe
There are two ways to log out of WebPAM PROe:
• Close your browser window
• Click Logout on the WebPAM PROe banner (below)
Clicking Logout brings you back to the Login Screen. After logging out, you must
enter your user name and password in order to log in again.