Promise Technology VTrack M-Class M200i - Manual (Page 48)

VTrak M-Class Product Manual
40
After the iSCSI Initiator is installed, follow the installation and setup instructions
that come with your GbE NIC card.
Note
Setup of an actual iSCSI initiator takes place after the disk array
and logical drive are configured on the VTrak. If you plan to use
LUN Masking, enable this feature and specify your LUNs before
setting up your iSCSI initiator.
See “Chapter 4: Management with WebPAM PROe” on page 57
and “Chapter 5: Management with the CLU” on page 157 for more
information.