Promise Technology VTrack M-Class M200i - Manual (Page 71)

Chapter 4: Management with WebPAM PROe
63
After sign-in, the WebPAM PROe opening screen appears.
Figure 5. WebPAM PROe Opening Screen
The first time you log in to WebPAM PROe, there will be no Users except for
“administrator”. There will be no disk arrays or logical drives.
If you setup your VTrak using WebPAM PROe (see “Chapter 3: Setup” on
page 29) you will have one User, “administrator” and one disk array and logical
drive.
Log-out of WebPAM PROe
There are two ways to log out of WebPAM PROe:
• Close your browser window
• Click Logout on the WebPAM PROe banner (below)
Clicking Logout brings you back to the Login Screen. After logging out, you must
enter your user name and password in order to log in again.