Nortel Networks NN43001-121 - Manual (Page 101)

101
Installation
This chapter contains the procedures necessary to install CS 1000
components and Office Communications Server (OCS) 2007 on a CS 1000
system.
The first step is to install the necessary CS 1000 components (if you do
not already have a working CS 1000 system in place), and then install the
Microsoft server components. After all hardware and software is installed,
you can then configure the Telephony Gateway and Services or Remote
Call Control components.
After configuration is complete, normalization of telephone numbers,
SIP routing, and redundancy help you integrate the Nortel and Office
Communications Server 2007 domains.
Figure 27 "Installation and
configuration process" (page 102) illustrates this process.
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Copyright © 2005–2008, Nortel Networks
.