Nortel Networks NN43001-121 - Manual (Page 213)

Remote Call Control 213
• SIPCTITotalMonitorStopSuccesses
• SIPCTITotalConferenceCallRequests
• SIPCTITotalConferenceCallSuccesses
• SIPCTITotalSetForwardingRequests
• SIPCTITotalSetForwardingSuccesses
• SIPCTITotalGetForwardingRequests
• SIPCTITotalGetForwardingSuccesses
• SIPCTITotalSessionTerminated
For information on how to access these OM’s through Element Manager,
see Element Manager System Administration (NN43001-632).
Signaling Server Expert Level CLI Commands
Using Signaling Server Expert Level CLI commands, as shown in Table 38
"Signaling Server Expert Level CLI commands" (page 213) , you can trace
AML commands that are sent by the TR/87 FE to the Call Server on behalf
of the Office Communicator clients that may be active.
Table 38
Signaling Server Expert Level CLI commands
Prompt Response Description
SIPCTIAmlTrace level Configure AML Trace level for
SIP CTI application.
The level can be one of the
following:
0—Turn off trace.
1—Print all input and output
AML data buffer.
2—Print all input and output
AML data buffer except
POLLING message.
3—Print all input and output
AML data buffer except
POLLING message, with IE
type decoding.
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Copyright © 2005–2008, Nortel Networks
.