Nortel Networks NN43001-121 - Manual (Page 211)

Remote Call Control 211
Prompt Response Description
> SIPCTITraceLevel
<level> Configure the TR87 SIP message
Trace Level. The level can be
one of the following:
0 –TR87 SIP message body
(ECMA 323) only
1 – TR87 SIP message body
(ECMA 323) and message
headers
> SIPCTITrace on Turn on SIP CTI trace for all
soft clients in both incoming and
outgoing directions.
> SIPCTITrace off Turn off SIP CTI trace for all
soft clients in both incoming and
outgoing directions.
> SIPCTITrace
<MsgRcv>
<MsgSend> Turn on SIP CTI trace for all
soft clients in incoming and/or
outgoing. The parameter is either
on or off.
> SIPCTITrace sc
<soft client SIP/Tel
URI/DN> <MsgRcv
><MsgSend> Turn on SIP CTI trace for a
specific soft client in incoming
and/or outgoing direction(s).
This may result in a number of
sessions as a single URI could be
used for multiple active sessions.
> SIPCTIOutput
<Dest> <"fileName"> Redirecting the SIP CTI trace to
a specific output destination.
The destination can be one of the
following:
1. TTY
2. RPTLOG
3. File
If File is selected as the output
destination, the filename must be
given.
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Copyright © 2005–2008, Nortel Networks
.