Nortel Networks NN43001-121 - Manual (Page 159)

Telephony Gateway and Services configuration 159
Table 35
LD 15
Prompt Response Description
REQ chg
TYPE net
TYPE NET_DATA
CUST 0
OPT
AC2
FNP
CLID yes
SIZE 5
INTL 1
ENTRY 0
HNTN
HLCL 967
HLOC 354
...
The response to SIZE must be a number greater than 0. The response
to ENTRY must match the CLID table entry for the target telephones.
Generally the default is 0.
Home LOC and Home NPA configuration
In order for the correct Caller Line ID (CLID) to be correctly displayed for
Office Communicator calls to the Public network, both the HLOC and HNPA
can require configuration. All Office Communicators that are part of an
ESN network require HLOC configuration. All Office Communicators that
make calls to the Public network in North America require that the Area
Code be configured.
For more information on the HLOC and HNPA, see IP Peer Networking
Installation and Commissioning (NN43001-313).
DNS Server configuration
Host Table configuration is replaced in Release 5.0 with DNS configuration.
In Element Manager, under LAN configuration (see DNS configuration), you
can enter up to three DNS server IP addresses. The DNS server must
be correctly configured with the Fully Qualified Domain Name (FQDN) of
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Copyright © 2005–2008, Nortel Networks
.