Nortel Networks NN43001-121 - Manual (Page 293)

Enterprise Edition 293
Checking that the Signaling Server is correctly configured
Step Action
1 Check the settings of SIP URI (see Figure 131 "SIP URI" (page
293) ).
Figure 131
SIP URI
—End—
Configuring NRS
Use the following procedure to check that the NRS is correctly configured.
Checking that NRS is correctly configured
Step Action
1 Go to Network Routing Service (NRS) and select Endpoints.
Confirm that the settings are correct (see
Figure 132 "MCM
endpoints" (page 294) ).
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Copyright © 2005–2008, Nortel Networks
.