Nortel Networks NN43001-121 - Manual (Page 231)

Capturing traces and logs 231
Figure 88
Event Viewer window
Resetting MCM debug trace
Use the following procedures to reset the MCM debug trace.
Resetting MCM debug trace
Step Action
1 On the MCM interface, select Tools and then choose Logs from
the menu.
2 Go to Log Level and choose None.
3 Delete the MCM.log file from the directory where MCM is installed.
—End—
OCS logs
Use the following procedures to activate an OCS log.
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Copyright © 2005–2008, Nortel Networks
.