Nortel Networks NN43001-121 - Manual (Page 175)

Remote Call Control configuration 175
Configuring the SIP CTI TR/87 ISM limit
Incremental Software Management (ISM) (SIP CTI TR/87) is used to define
the number of TNs that can be configured with the T87A class of service.
The TR/87 configuration for a given TN requires that in addition to the
existence of the CLS T87A, the controlled line itself must also be identified
as an AST DN. This implies that AST ISMs are also required.
As part of the ordering process, a corresponding AST license is provided for
each SIP CTI TR/87 license. This ISM limit is prompted only if package 408
(MS_CONV) is unrestricted (requires level 2 packages).
The SIP CTI TR87 ISM is an instant ISM and does not require a cold start
of the Call Server to take effect (see
Figure 62 "LD 22: ISM Limit printout"
(page 175) ).
Prompt Response Description
REQ prt
TYPE slt
Figure 62
LD 22: ISM Limit printout
Configuring a station
SIP CTI control of a DN key can be supported on IP, digital, and analog
stations.
ATTENTION
Features such as Make Call and Answer Call depend on the hands-free capability
of the station and the on-hook default path configuration on the station. Therefore
the use of certain features on stations without hands-free support is limited.
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Copyright © 2005–2008, Nortel Networks
.