Nortel Networks NN43001-121 - Manual (Page 181)

Remote Call Control configuration 181
SIP CTI Services configuration settings
In Element Manager, under SIP CTI services, the Calling Device URI
Format must be configured as phone-context=<SIP URI Map Entries> to
support OCS 2007 RCC. Ensure the Dial Plan prefix section values under
SIP CTI Services are configured. Click Save and Transfer the configuration
and then reboot the Signaling Server.
For each of the SIP CTI settings, if a configuration change is made and a
save and transfer is performed, all active SIP CTI sessions are terminated
to apply the change. Office Communicator automatically reestablishes the
session without user intervention.
There is a limitation where you cannot configure SIP CTI for two or more
customers on a single node.
See Figure 66 "SIP CTI Services" (page 182) for the settings in Element
Manager.
ATTENTION
Do not choose support TLS endpoints only with Mediation Server present
because TLS cannot be configured for the entire path as it is not supported
(between SPS and MCM).
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Copyright © 2005–2008, Nortel Networks
.