Figure 130 rtc server local group, Procedure – Nortel Networks NN43001-121 User Manual
Page 290
290
Appendix B Configuration Examples
Checking that MCM is correctly installed and configured.
Step
Action
1
Assign the required Local group to the MCM user.
Prior to installation of MCM, an MCM user inside the Active Directory
is created and the RTC Server Local Group and RTC Server
Application local group is assigned to this user.
2
On the Proxy Server, right-click on My Computer and choose
Manage. This assigns the MCM user to the RTC Server Local
Group and RTC Server Application.
3
Under Local Users and Groups, select Groups.
4
Right-click on RTC Server Local Group and select Properties.
Confirm that the settings are correct . See
for an example.
Figure 128
RTC Server Local Group
5
Right-click on RTC Server Applications and select Properties.
Confirm that the settings of the RTC Server Application group are
correct (see
Figure 129 "RTC Server Application group" (page
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121
01.03
Standard
Release 5.0
30 April 2008
Copyright © 2005–2008, Nortel Networks
.