Nortel Networks NN43001-121 - Manual (Page 229)

Capturing traces and logs 229
• SIP: SIP messages (filtered by distinct DN) are logged further to alarms.
Only one DN can be specified at the same time in MCM.
• Debug: Debug information is logged to the MCM log file.
• SIP and Debug
To clear a log, click on the Clear Log button. The backup file is stored
as MCMlog.bak. See
Figure 87 "MCM logs" (page 229) for an example
of the Logs window.
Figure 87
MCM logs
Activating MCM logging
The following section details how to turn on MCM logging. MCM Logs
can be enabled from MCM Console. Log files are stored in MCM.log file
which is located in the MCM application installation directory (?:\Program
Files\Nortel\MCM\MCM.log).
Step Action
1 On the MCM console interface, to activate MCM logs, select Tools
and then choose Logs from the menu.
2 Go to Log Level and choose Debug.
—End—
Nortel Communication Server 1000
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Copyright © 2005–2008, Nortel Networks
.