Ricoh 700 - Manual (Page 102)

Copying
86
2
Note
❒ Depending on the condition of the current copy job, the [Return to menu in
setting new job] or [Return to menu in scanning] key might be displayed. In this
case, press the [Return to menu in setting new job] or [Return to menu in scanning]
key.
Deleting Job Preset
You can delete the preset job in the Job List or Check modes display. The follow-
ing procedure describes how to delete the preset job in the Job List display.
A
Press the { Job List } key.
B
Press the preset job you want to delete, then press the [Delete preset jobs] key.
Note
❒ If you delete the preset job in the Check modes display, press the [Cancel]
key in the Check modes display.
❒ If the desired job is not shown and more than 5 jobs are preset, press the
[ T 5
∼
8] key to display the desired job.
ZBQS090N
Copy
New Job
Document Server
New Job
Job List