Ricoh 700 - Manual (Page 247)

Using Connect Copy
231
4
❖ Sub-unit display
Reference
If the [Connect] key is not visible or you cannot select it, see
⇒
P.252 “Con-
nect Copy” .
If you press the [Connect] key and the message “Connect Copy is not avail-
able at this time. Please check the connected machine. Press [Cancel] , con-
nect copy will be cancelled.” appears, see
⇒
P.249 “Connect Copy”.
C
Set your originals in the master unit.
Reference
⇒
P.31 “Setting Originals”
D
Make any settings you require on the master unit.