Ricoh 700 - Manual (Page 315)

e Removing Jammed Staples
299
5
Staple unit for Saddle Stitch function
• 6: Push the cartridge until it clicks.
• 7: Close the front cover of the finisher.
• 1: Open the front bottom cover of the
finisher.
• 2: Pull lever R7 and fully pull out the
staple unit.
• 3: While pulling the lever of the staple
unit, lift the lever of the staple unit.
• 4: Take out the cartridge.
• 5: Pull the blue knob down, then lift
the knob of the face plate.
• 6: Remove all jammed staples.
• 7: Bring the face plate back into place
by pushing it.
• 8: Push the cartridge.
• 9: Bring the staple unit back into place,
then close the front bottom cover of the
finisher.
ZBQP140E
1
2
R7
ZBQP150E
1
2
3
ZBQP160E
ZBQP170E
1 2
ZBQP180E