Ricoh 700 User Manual
Page 272
Advertising
What to Do If Something Goes Wrong
256
5
Nothing happens when
you press the
[Connect]
key.
The master unit or sub-unit
needs a fresh supply of ton-
er or staples.
Solve the problem in the
appropriate unit.
Reference
For all other situations,
follow the instructions
on the display.
To exit Connect Copy
mode, press the master
unit {
Clear/Stop
} key,
then press the
[Cancel]
key.
A paper misfeed occurred
during stapling.
Remove the misfed paper.
To exit Connect Copy
mode, press the {
Clear/
Stop
} key, then press the
[Connect]
key.
Machine Status
Problem/Cause
Action
Advertising
This manual is related to the following products: