Metric version – Ricoh 700 User Manual
Page 77
Sort/Stack/Staple
61
2
• OHP transparencies
• Adhesive labels
• Curled paper
• Low stiffness paper
• Paper of different vertical sizes
Note
❒ For this mode, the following limitation applies. When the number of copies
exceeds the tray capacity, copying stops. In this case, remove the copies from
the shift tray and then resume copying.
❖
Metric version
*1
Depending on the number of sheets to be stapled and whether sheets have
punched holes or not, the maximum tray capacity might be reduced.
*2
If you copy when the paper remains on the tray, the capacity might be reduced.
*3
Available staple positions are “Top” and “Bottom”.
With 50-Sheet Finisher With 100-Sheet Finish-
er
With Booklet Finisher
Paper
size
A3L, B4L, A4KL,
B5KL, 8KL,
16KKL
A3L, B4L, A4KL,
B5KL, 8KL,
16KKL
A3L, B4L, A4K(L)
, B5K
Saddle stitch function:
A3L, B4L, A4L
Sta-
pler
capac-
ity
(without punch)
• A4 or smaller: 50
sheets (80g/m
2
)
• B4 or larger: 30
sheets (80g/m
2
)
(without punch)
• A4K, B5K: 100
sheets (80g/m
2
)
• Except A4K, B5K:
50 sheets (80g/m
2
)
• A4K or smaller: 50
sheets (80g/m
2
)
• A4L or larger: 30
sheets (80g/m
2
)
• Saddle stitch func-
tion: 15 sheets (80g/
m
2
)
Shift
tray
capac-
ity
(A4K
)
3,000 sheets (80g/m
2
)
3,000 sheets (80g/m
2
)
750 sheets (80g/m
2