Ricoh 700 - Manual (Page 178)

Copying
162
2
Slip Sheets
Every time the original's page changes, a slip sheet is inserted. This function can
be used to insert a slip sheet automatically between each OHP transparency cop-
ied or used as a stack function. You can also copy onto the inserted slip sheets.
Preparation
Before selecting this function, specify the paper tray for slip sheets. See “Slip
Sheet 1”, “Slip Sheet 2” in the System Settings manual.
Limitation
❒ You cannot use this function with Chapters and Paper Designate modes.
❒ In Connect Copy mode, you cannot use the non-standard size paper.
Note
❒ Set the slip sheets in the same orientation as originals.
❒ You can specify whether to make copies onto the inserted slip sheets or not.
❒ If you do not copy onto slip sheets, they are excluded from the number of cop-
ies counted.
❒ In Connect Copy mode, specify the paper settings before you press the [Con-
nect] key.
When using OHP transparencies set on the bypass tray
❖ Blank
1
2
3
1
2
3
1
2
2
1