Ricoh 700 - Manual (Page 263)

247
5. What to Do If Something
Goes Wrong
If Your Machine Does Not Operate as You
Want
General
Machine Status Problem/Cause Action
The machine instructs you
to wait. The machine is warming
up. Wait for the machine to
warm-up.
Reference
You can use Auto Start
mode during warm-up
period. See
⇒
P.90 “Au-
to Start” .
Copy paper is moving in
tray 1 (Tandem Tray). Wait for the machine.
The machine cannot detect
the original size. Improper original is set.
See
⇒
P.21 “Sizes difficult to
detect” .
Set non-standard size orig-
inal on the exposure glass.
See
⇒
P.31 “Setting Origi-
nals on the Exposure Glass” .
Select paper manually, not
in Auto Paper Select mode.
Do not use Auto Reduce/
Enlarge mode.
Original is not set. Set your originals.
The machine instructs you
to check the original direc-
tion. There is no copy paper that
is in the same direction as
the originals. Set the original in the same
direction as the copy paper.
The machine instructs you
to check paper size. Improper original size is
set. Select the proper paper
size.
The machine cannot per-
form rotate-sorting for this
paper size. The size of paper for which
no rotate-sorting is avail-
able is selected. Select the proper paper
size. See
⇒
P.55 “Sort”.
The machine cannot punch
this size of paper. -- Select the proper paper size
that can be used in Punch
mode. See
⇒
P.69 “Punch”.