Ricoh 700 User Manual
Page 254
Connect Copy (Option)
238
4
❒ The print settings of the document you select first are applied to the
merged documents.
❒ If you select multiple files, you can confirm the file names or print order of
the files you selected in step
C by scrolling through the list with the
[
T
]
and
[
U
]
keys.
❒ Press the
[Select File]
key to return to the “Document Server: Files” display.
Reference
For details, see the explanations of each function in this manual.
E
Press the
[Connect]
key.
When the key darkens, the two units are connected.
F
Enter the required number of prints using the number keys.
Note
❒ Up to 999 can be entered.
❒ To change the value entered, press the {
Clear/Stop
} key and enter a new
value.
❒ If you print more than one set using the Sort function, you can check the
print result by printing out only the first set. See
G
Press the {
Start
} key.
Printing starts after the image data stored in the master unit has been trans-
ferred to the sub-unit.
Note
❒ The printing may take some time after transferring the image data to the
sub-unit.
❒ To stop originals from being printed, press the {
Clear/Stop
} key on the mas-
ter unit, then press the
[Cancel]
key following the instructions on the dis-
play.
❒ The number of sheets and sets printed by the master unit and sub-unit may
be different.
❒ The master unit and sub-unit may not finish printing at the same time.