Ricoh 700 - Manual (Page 307)

d Adding Staples
291
5
Staple unit for Saddle Stitch function
To initialize the staple unit with the User Tools (System Settings)
A Press the {
User Tools/Counter } key.
B Press the
[System Settings] key.
C Press the
[Staple initialization] key on the “Basic Page 2” menu.
D Press the
[OK] key.
• 6: Push the cartridge until it clicks.
• 7: Close the front cover of the finisher.
• 1: Open the front bottom cover of the
finisher.
• 2: Pull lever R7 and fully pull out the
staple unit.
• 3: While pulling the lever of the staple
unit, lift the lever of the staple unit.
• 4: Take out the empty cartridge.
• 5: Set the new cartridge.
• 6: Bring the staple unit back into place.
• 7: Close the front bottom cover of the
finisher.
ZBQP060E
1
2
R7
ZBQP070E
ZBQP080E
ZBQP090E