Ricoh 700 - Manual (Page 59)

Basic Functions
43
2
A
Press the appropriate key to select the original type.
Note
❒ If “Yes” has been selected in “Original Mode Display” of the User Tools,
press the [Original Mode] key to select the original type, then press the [OK]
key. See “Original Mode Display” in
⇒
P.310 “General Features 1 /
3
” .
❒ If you do not wish to set any other functions, press the { Start } key to start
copying.
Selecting Copy Paper
There are two ways to select copy paper:
❖ Auto Paper Select
The machine selects a suitable size of copy paper automatically based on the
original size and the reproduction ratio.
⇒
P.46 “Rotated copy”.
❖ Manual Paper Select
Choose the tray containing the paper you wish to copy onto: Paper Tray, By-
pass Tray or large capacity tray (LCT).
Reference
⇒
P.73 “Copying from the Bypass Tray”.
Limitation
❒ Auto Paper Select mode is intended for normal and recycled paper.
❒ If you set all the paper trays other than “No Display” or “Recycled Paper”,
you cannot use Auto Paper Select.