Ricoh 700 - Manual (Page 277)

If You Cannot Make Copies As You Want
261
5
Stamp
When Memory Is Full
Document Server
Orientation of copies (Top
to Top, or Top to Bottom) is
not correct. You set originals in an in-
correct direction or the ori-
entation setting is
incorrect. Select the correct orienta-
tion, or set originals cor-
rectly. See
⇒
P.111
“Duplex” .
Note
❒ If you set A3, 11" ×
17"
or B4, 8 1 /
2
"
×
14" origi-
nals as shown below, se-
lect
[Top to Bottom] to
make copies in “Top to
Top” orientation. Or se-
lect
[Top to Top] to make
copies in “Top to Bot-
tom” orientation.
Problem Cause Action
The wrong date is printed. The machine main power
has been turned off for
more than 20 days. Set the date correctly again.
See “Set Date” in the Sys-
tem Settings manual.
The stamp position is
wrong. The paper orientation is
wrong. Check the paper orienta-
tion and stamp position.
The stamp does not appear. Stamp is too large to print. Check the size of the user
stamp and register it again.
See
⇒
P.189 “Program/De-
lete User Stamp” .
Machine Status Action
The memory is full. Delete any unnecessary files and then
scan the document again. See
⇒
P.220
“Deleting Saved Documents” .
Problem Cause Action
CP270-A