Ricoh 700 User Manual
Page 249
Using Connect Copy
233
4
If you use Batch (SADF) mode
A Set your originals and press the {
Start
} key. After all the previously set
originals are fed, set the next originals while the Auto Feed indicator is
lit.
B When all pages have been scanned in, press the {
#
} key. Copying starts
simultaneously in the master and sub-unit.
Note
❒ To stop originals from being scanned or copied, press the {
Clear/Stop
}
key on the master unit, then press the
[Cancel]
key following the instruc-
tions on the display.
Reference
See
If the size of scanned data exceeds memory capacity, the memory over-
flow message is displayed. Follow the instructions in “When Memory
Is Full”. See
G
Pick up your copies from the master unit and sub-unit.
Note
❒ The number of sheets and sets copied by the master unit and sub-unit may
be different.
❒ The master unit and sub-unit may not finish copying at the same time.
❒ When using the Sort/Staple function, copies are organized into copy sets.
If there is a paper jam in one machine during this process, it is not possible
for the other machine to take over the copy set processing of the down ma-
chine.
-Copy output order
❖
When copying in Sort/Staple mode
e.g., copying 6-sets of a 3-sheet original
• Copying with the master unit (face down output)—sub-unit (face down
output)