Ricoh 700 - Manual (Page 95)

Programs
79
2
B
Press the { Program } key.
C
Press the [Store] key.
D
Press the program number you want to store.
Note
❒ Program numbers with m already have settings in them.
Reference
⇒
P.80 “Changing a Stored Program”
E
Enter the program name with the letter keys on the display panel.
Note
❒ If you do not wish to enter the program name, go to step F.
❒ You can register up to 25 characters.
❒ To change the name entered, press the
[Back Space] , [Clear] or { Clear/Stop }
key and enter new letters.
F
Press the [OK] key.
When the settings are successfully stored, the m indicator goes on.
TSPS030N
Interrupt Program Clear Modes/
Energy Saver