Ricoh 700 - Manual (Page 45)

29
2. Copying
Basic Procedure
A
Make sure that the machine is in Copy mode.
If the machine is not in Copy mode, press the {
Copy/New Job } key.
B
When the machine is set for the user code, enter the user code with the
number keys and then press the {
# } key.
Reference
⇒
P.90 “User Codes”.
C
Make sure that there are no previous settings remaining.
Note
❒ To clear settings, press the { Clear Modes/Energy Saver } key.
D
Set your originals.
Reference
⇒
P.31 “Setting Originals”.
E
Set your desired settings.
F
Enter the number of copies required with the number keys.
Sample Copy
Clear/Stop
Start
Enter
TSPS020N