Ricoh 700 - Manual (Page 287)

x Clearing Misfeeds
271
5
❖ With Booklet Finisher
R CAUTION:
Important
❒ When clearing misfeeds, do not turn off the operation switch. If you do, your
copy settings are cleared.
❒ To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
❒ If paper misfeeds occur repeatedly, contact your service representative.
Note
❒ More than one misfed area may be indicated. In this case, check every appli-
cable area. See the following charts: A, B, C, D, E1 – E5, P1, P2, U, R (R1 – R6)
❒ You can find a sticker explaining how to remove misfed paper inside of the
front cover or inside of the finisher.
• The fusing section of this equipment might be very hot. You should be very
careful that you don't touch this section when removing the misfed paper.
ZBQY190E